close mob menu
My Cart
Your cart is empty
Looks like you haven’t added any items to the cart yet. Start shopping to fill it in.

Tracki Pro
Short User Manual

General Information
These operating instructions are for the Tracki Pro, which will simply be referred to as 'tracker' in the following. They contain important information regarding set-up and operation. Before using the tracker, please read the operating instructions carefully. This particularly applies to the safety notes. Failure to adhere to these operating instructions may result in severe injury or damage to the tracker.The operating instructions are based on the standards and rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws. Keep the operating instructions for future use. If you pass the tracker on to third parties,please be absolutely sure, to include these operating instructions.
Initial set-up
TURNING THE TRACKER ON
1
Take the tracker outside so that it is in the open air.
2
Put the tracker down and wait for at least 15 min. The tracker will carry out initial GPS position. This is required for the device to function correctly. The tracker will then be ready for use and can be activated.
3
Press and hold the ON/OFF button for at least 3 sec. The green light on the front will start to flash.
Please note: this procedure is only required the very first time the tracker is turned on.
ACTIVATING THE TRACKER VIA WEB
1
Open your internet browser and go to   app.tracki.com
2
Click on “Add tracker” and follow the on-screen instructions.
3
Insert your tracker IMEI and Device ID, and follow the instructions to activate your service plan.
ACTIVATING VIA APP
1
Download the Tracki app from the  Apple Store  or  Google Play.
2
Register or log into your Tracki account.
3
In the Devices tab click on "+" sign and follow the instructions.
INSTALLING AND CHARGING THE BATTERY
When you unpack the tracker for the first time, the battery is empty. Charge it as follows:
1
Connect the charging plug of the charging cable to the tracker with USB-C charing port.
2
Charge the tracker for 12 hours. The red light will blink whilst charging. When the tracker is fully charged. the light will turn solid red.
3
Connect the other end of the charging cable to the USB power adaptor and then to the power socket. Alternatively you can also connect the charging cable to a computer.
4
Disconnect the tracker from the charging cable.
Device Notification
*In some countries SMS come only with optional added plan
Package contents
  1. ON / OFF Button
  2. Adhesive tape holder
  3. Magnet holder
  4. Screws holder
  5. USB Type C charging port
  6. Red light
  7. Blue light
  8. Green light
  9. Charging cable USB Type C
Button Functions
1. ON/OFF BUTTON

Press and hold the ON/OFF button to turn the tracker ON or OFF.
Briefly press the ON/OFF button once the check whether the trackeris on.



Please note: if the green light flashes, the tracker is ON. If no light comes on then the trackers is OFF.



2. SOS button

If you press the power button 3 times (short presses), the SOS alarm will be activated, the location and a text message will be sent to the telephone number or e-mail you have provided.

Device Lights
Tracker Placement
Where to place your Tracki GPS on a car.
Where to place your Tracki GPS under a vehicle